50 Photos
Fluorapatite
Chemical Formula	Ca5(PO4)3F
Species	Phosphates
Crystal System	Hexagonal
Mohs Scale	5
Specific Gravity	3.1-3.2
Color	Sea-green, Purple, purple, blue, pink, yellow, brown, white, colorless, may be zoned
Streak	White
Luster	Vitreous, Sub-Vitreous, Resinous, Waxy, Greasy
Refractive Index	n = 1.631 - 1.650 n = 1.627 - 1.646
Diaphaneity	Transparent, Opaque
Cleavage	Poor/IndistinctIndistinct and
Fracture	Irregular/Uneven, Conchoidal
Crystal Habit：Massive to prismatic cyrstaliine
Geological Setting：Most common rock forming phosphate. Accessory mineral in most igneous rocks with important concentrations in carbonatites. Common in marbles and skarns. Major mineral in sedimentary phosphorites.

Fluorapatite, often with the alternate spelling of fluoroapatite, is a mineral with the formula Ca₅(PO₄)₃F (calcium fluorophosphate). Fluorapatite is a hard crystalline solid. Although samples can have various color (green, brown, blue, violet, or colorless), the pure mineral is colorless as expected for a material lacking transition metals. It is an important constituent of tooth enamel. Fluorapatite crystallizes in a hexagonal crystal system. It is often combined as a solid solution with hydroxylapatite (Ca₅(PO₄)₃OH) in biological matrices. Chlorapatite (Ca₅(PO₄)₃Cl) is another related structure. Industrially, the mineral is an important source of both phosphoric and hydrofluoric acids.

Fluorapatite as a mineral is the most common phosphate mineral. It occurs widely as an accessory mineral in igneous rocks and in calcium rich metamorphic rocks. It commonly occurs as a detrital or diagenic mineral in sedimentary rocks and is an essential component of phosphorite ore deposits. It occurs as a residual mineral in lateritic soils.

Synthesis

Fluorapatite can be synthesized in a two step process. First, calcium phosphate is generated by combining calcium and phosphate salts at neutral pH.This material then reacts further with fluoride sources (often sodium monofluorophosphate or calcium fluoride (CaF₂)) to give the mineral. This reaction is integral in the global phosphorus cycle.

3 Ca²⁺ + 2 PO3?
4 → Ca₃(PO₄)₂

3 Ca₃(PO₄)₂ + CaF₂ → 2 Ca₅(PO₄)₃F

Applications

Fluorapatite as a naturally occurring impurity in apatite generates hyrodrogen fluoride as a byproduct during the production of phosphoric acid, as apatite is digested by sulfuric acid. The hydrogen fluoride byproduct is now one of the industrial sources of hydrofluoric acid, which in turn is used as a starting reagent for synthesis of a range of important industrial and pharmaceutical fluorine compounds.

Synthetic fluorapatite doped with manganese-II and antimony-V formed the basis for the second generation of fluorescent tube phosphors referred to as halophosphors. When irradiated with 253.7 nm mercury resonance radiation they fluoresced with broad emission which appeared within the range of acceptable whites. The antimony-V acted as the primary activator and produced a broad blue emission. Addition of manganese-II produced a second broad peak to appear at the red end of the emission spectrum at the expense of the antimony peak, excitation energy being transferred from the antimony to the manganese by a non radiative process and making the emitted light appear less blue and more pink. Replacement of some of the fluoride ions with chloride ions in the lattice caused a general shift of the emission bands to the longer wavelength red end of the spectrum. These alterations allowed phosphors for Warm White, White and Daylight tubes, (with corrected color temperatures of 2900, 4100 and 6500 K respectively), to be made. The amounts of the manganese and antimony activators vary between 0.05 and 0.5 mole percent. The reaction used to create halophosphor is shown below. The antimony and manganese must be incorporated in the correct trace amounts if the product is to be fluorescent.

6 CaHPO₄ + (3+x) CaCO₃ + (1-x) CaF₂ + (2x) NH₄Cl → 2 Ca₅(PO₄)₃(F_1-xCl_x) + (3+x)CO₂ + (3+x)H₂O+ (2x)NH₃

Sometimes some of the calcium was substituted with strontium giving narrower emission peaks. For special purpose or colored tubes the halophosphor was mixed with small quantities of other phosphors, particularly in De-Luxe tubes with higher color rendering index for use in food market or art studio lighting.

Prior to the development of halophosphor in 1942, the first generation willemite latticed, manganese-II activated zinc orthosilicate and zinc beryllium orthosilicate phosphors were used in fluorescent tubes. Due to the respiratory toxicity of beryllium compounds the obselescence of these early phosphor types were advantageous to health.

Since about 1990 the third generation TriPhosphors, three separate red, blue and green phosphors activated with rare earth ions and mixed in proportions to produce acceptable whites, have largely replaced halophosphors.

Fluorapatite can be used as a precursor for the production of phosphorus. It can be reduced by carbon in the presence of quartz:

4 Ca₅(PO₄)₃F + 21 SiO₂ + 30 C → 20 CaSiO₃ + 30 CO + SiF₄ + 6 P₂

Upon cooling, white phosphorus (P₄) is generated:

2 P₂ → P₄